Johnson & Johnson Surgical Vision Veritas, Operator'S Manual

Page: 221 / 270

Error Messages, Troubleshooting, and Diagnostics
Z370584 Rev. D Status, Warning, and Error Messages
10-23
287 Diathermy error.
Probable cause: Diathermy Driver failure.
Corrective action:
1. Check the diathermy cord connections.
2. Select End Case .
3. Select Shutdown .
4. Select Yes and wait for the system to power off.
5. Start up the system.
6. If the error still does not clear or if the error continues to occur, document the error
message and contact JJSV for technical service.
290 Foot pedal error.
Probable cause:
• The foot pedal has failed.
• The user pressed the foot pedal.
Corrective action:
1. Check the foot pedal. Ensure the foot pedal is connected.
2. Select End Case .
3. Select Shutdown .
4. Select Yes and wait for the system to power off.
5. Start up the system.
6. If the error does not clear or if the error continues to occur, document the error message
and contact JJSV for technical service.
291 Phaco Diathermy power supply error.
Probable cause: Diathermy regulator or driver failure.
Corrective action:
1. Select End Case .
2. Select Shutdown .
3. Select Yes and wait for the system to power off.
4. Start up the system.
5. If the error does not clear or if the error continues to occur, document the error message
and contact JJSV for technical service.
309 Piston pump pressure high/low.
Probable cause: The pump or the drive circuit failed.
Corrective action: