Jeep AVENGER 2023, Owner'S Handbook Manual

Page: 199 / 300

197
LED HEADLIGHTS
Headlights for low and high beam,
daytime running lights and turn lights
are designed as LEDs and cannot be
changed.
Have lights repaired by a Jeep Dealership
in case of failure.
FRONT FOG LIGHTS
(where provided)
Have lights repaired by a Jeep Dealership
in case of failure.
TAIL LIGHTS
Halogen tail lights
Open the load compartment
remove the screws (1) fig. 267 with
the Torx T30 screwdriver provided and
extract the tail lights
267
JJ000590
turn the connector of the bulb to be
replaced ((1) or (2)) fig. 268 a quarter
turn anticlockwise
(1) Taillight and stop lamp
(2) Turn light
268
JJ000382
extract the bulb and replace it
refit the connector and turn the bulb
holder clockwise
refit the tail lights and the Torx screws
LED tail, stop, reversing and turn lights
(front and side), rear fog lights
Have lights repaired by a Jeep Dealership
in case of failure.
SIDE DIRECTION INDICATORS
(ON EXTERIOR REAR VIEW
MIRROR)
Have lights repaired by a Jeep Dealership
in case of failure.
CENTRE HIGH-MOUNTED BRAKE
LIGHT
Have lights repaired by a Jeep Dealership
in case of failure.
LED NUMBER PLATE LIGHT
Have lights repaired by a Jeep Dealership
in case of failure.
BULB CHECK
Switch on the ignition, operate and
check all lights.
INTERIOR LIGHTS
Have the following bulbs replaced by a
Jeep Dealership:
courtesy light (halogen version)
reading lights (halogen version)
Instrument panel lights, LED load
compartment light and LED courtesy and
reading lights
Have lights repaired by a Jeep Dealership
in case of failure.
FUSES
269) 270)
117)
WARNING
269) Changing a fuse. All work must be
carried out only by a qualified Jeep
Dealership. The replacement of a fuse
by a third party could cause a serious
malfunction of the vehicle.
270) Installing electrical accessories. The
vehicle's electrical system is designed
to operate with standard or optional
equipment. Before fitting other electrical
equipment or accessories to your vehicle,
contact a Jeep Dealership.