Jeep AVENGER 2023, Owner'S Handbook Manual

Page: 45 / 300

43
AIR TEMPERATURE
ADJUSTMENT
Press the (1) fig. 79 button:
press downwards: decrease
temperature
press upwards: temperature rise
By repeatedly pressing the (1) button
upwards or downwards the HI (maximum
air temperature) and LO (minimum air
temperature) functions are switched on
respectively. To turn these functions off,
ask for a numerical air temperature.
AIR DISTRIBUTION SELECTION
You can manually set one of the
following air distributions by pressing the
(2), (4), (5), (6) fig. 79 buttons on the
dashboard or the graphic buttons located
on the Uconnect™ 10.25"/10.25" NAV
system display:
(2) Maximum windscreen defrosting.
(4) Airflow to the front and rear footwell
vents. This air distribution setting heats
the passenger compartment most
quickly, giving a prompt sensation of
warmth.
(5) Airflow at central and side dashboard
vents to ventilate the chest during the
hot season.
(6) Air flow towards windscreen.
You can select the combination of
several modes by pressing the buttons in
sequence.
FAN SPEED ADJUSTMENT
Press button (10) to increase/decrease
the fan speed:
press downwards: decrease speed
press upwards: increase speed
The speed is displayed on the A/C
screen of the Uconnect™ 10.25"/10.25"
NAV system. A specific fan level can be
selected by pressing the button :
maximum fan speed : all bars are lit up;
minimum fan speed
: one bar is lit up.
AIR RECIRCULATION
The air recirculation can be switched
on/off by pressing the button (7) fig. 79.
WARNING The engagement of the
recirculation system makes it possible
to reach the required heating/cooling
conditions faster. It is, however,
inadvisable to use it on rainy/cold days,
or with low external temperatures, as
it would considerably increase the
possibility of the windows misting up
inside rapidly (especially if the climate
control system is off).
When the outside temperature is low,
recirculation could be switched off (air
drawn from the outside) to prevent the
windows misting up.
To guarantee good air quality inside
the passenger compartment, every 15
minutes of recirculation, the system
takes in air from outside for 1 minute
and then returns to recirculation.
CLIMATE CONTROL
COMPRESSOR
Press button (8) fig. 79 to
activate/deactivate the compressor.
Switching off the compressor remains
stored even after the ignition device has
been turned to the STOP position.
WARNING With the compressor off, air
cannot be introduced to the passenger
compartment with a temperature lower
than the external temperature. Moreover,
under certain environmental conditions,
windows could mist up rapidly since the
air is not dehumidified.
HEATED REAR WINDOW
DEMISTING/DEFROSTING
Press button (3) fig. 79 to activate
heated rear window demisting/defrosting.
Whenever the ignition device switches
to the position 2, the function switches
off automatically after approx. 10
minutes the first time it is activated. The
following activations have a duration of 5
minutes.
If this function is provided, pressing
the button
REAR also activates
demisting/defrosting of door mirrors and
heated vents (where provided).
WARNING Do not apply stickers to the
inside of the heated rear window over
the heating filaments, to avoid damage
that might cause them to stop working
properly.
HEATED WINDSCREEN
(where provided)
In cold weather, this system heats the
bottom of the windscreen, as well as the