Jeep AVENGER 2023, Owner'S Handbook Manual

Page: 146 / 300

STARTING AND DRIVING
144
speed. This value is then
immediately shown as the new
speed setting on the instrument
panel.
After passing the sign:
press OK. The message "OK?"
fig. 186 is displayed to confirm the
request to save
press OK again to save the
suggested speed. The new speed
setting value is displayed on the
instrument panel
Pausing/resumption of cruise control
Press (4) or depress the brake pedal.
The symbol is displayed if all the
activation conditions are met.
Cruise control may also have been
paused:
automatically, if the electronic
stability control (ESC) system is triggered
by shifting to neutral or engaging
reverse gear
by using the electric parking brake
by unfastening the seat belt
by opening the driver's door
Press (4) or OK to reactivate cruise
control.
Following braking that has brought the
vehicle to a complete stop, if the traffic
conditions do not allow the vehicle to
begin moving again within 3 seconds
of stopping, press (4) or the accelerator
pedal to move off.
NOTE Cruise control remains active
following a gear change.
WARNING When cruise control is paused
and the driver tries to reactivate it, a
specific message is temporarily displayed
if reactivation is impossible (required
conditions not met).
Changing the programmed speed setting
with the Traffic Sign Recognition function
Press OK to accept the speed suggested
by the function on the instrument panel,
then press again to confirm.
WARNING If the selected speed is far
from the current vehicle speed, a strong
acceleration or deceleration is felt.
Changing the inter-vehicle distance
Press (2) to display distance setting
thresholds ("Distant", "Normal" or
"Close"), then make successive short
presses upwards/downwards to select a
threshold.
After a few seconds, the option is
accepted and will be memorised when
the ignition is switched off.
The driver must keep a sufficient safety
distance from the vehicle in front.
Temporarily exceeding the speed setting
Depress the accelerator pedal. The
system is suspended as long as the
acceleration is maintained. The speed
setting flashes as long as the current
speed of the vehicle is higher than the
speed setting.
Deselecting the system
Press successively on (3) until OFF mode
is displayed on the instrument panel.
After a few seconds, cruise control mode
is deselected. The Driving aids mini-view
disappears.
Cruise control selected, but
cannot be activated. All the operating
conditions have not been met.
Cruise control selected,
awaiting confirmation for activation. All
the operating conditions are met.
Cruise control paused, but
cannot be activated. All the operating
conditions have not been met.
Cruise control paused,
awaiting confirmation for reactivation. All
the operating conditions are met.
Cruise control active, vehicle
detected.
Cruise control suspended,
following brief acceleration by the driver.
(with acoustic message) Brake or
accelerate, depending on the context.