Jeep AVENGER 2023, Owner'S Handbook Manual

Page: 173 / 300

171
3. Wall plug
Basic domestic cables (mode 2) are
used for charging at domestic electrical
outlets. A basic domestic cable (mode 2)
consists of a vehicle plug, a control box
and a plug for the domestic electrical
outlet. The control box has an intergrated
charge controller and several LEDs
indicating the charging status.
Enhanced domestic cables (mode 2) are
similar to basic domestic cables (mode
2). However, the charging performance
of enhanced domestic cables (mode 2
charging) is better than the charging
performance of basic domestic cables
(mode 2).
Charge status control unit
POWER Green: electrical connection
established; charging can begin.
CHARGE Flashing green: charging in
progress or temperature pre-conditioning
activated. Fixed green: charging
complete.
FAULT Red: fault; charging not
permitted or must be stopped
immediately. Check that everything
is connected correctly and that the
electrical system is not faulty.
If the indicator lamp does not go off,
contact a Jeep Dealership.
Upon plugging the charging cable into
a domestic socket, all of the indicator
lamps come on briefly.
If no indicator lamps come on, check the
domestic socket's circuit-breaker:
if the circuit-breaker has tripped,
contact a professional to check that the
electrical system is compatible and/or
carry out any necessary repairs
if the circuit-breaker has not tripped,
stop using the charging cable and
contact a Jeep Dealership
Manual reset procedure
The control unit can be reset by
simultaneously disconnecting the
charging connector and the wall socket.
Then, reconnect the wall socket first. For
more information, refer to the control
unit handbook.
Important information about portable
electric vehicle charging
Charging an electric vehicle can stress
a building's electrical system more than
a typical household appliance.
Before you plug in to any electrical
outlet, have a qualified electrician
inspect and verify the electrical system
(electrical outlet, wiring, junctions and
protection devices) for heavy-duty service
at a 10 A continuous load.
Electrical outlets may wear out with
normal usage or be damaged over time,
making them unsuitable for electric
vehicle charging.
Check the electrical outlet / plug
while charging and discontinue use if
the electrical outlet / plug is hot, then
have the electrical outlet serviced by a
qualified electrician.
When outdoors, plug into an electrical
outlet that is weatherproof while in use.
Mount the charging cable to reduce
strain on the electrical outlet / plug.
Charging system/ maintenance/ cleaning
The device is maintenance-free. If you
need to clean the device, use a soft
cloth slightly dampened with a mild
detergent solution, then wipe dry with a
dry cloth. Do not use abrasive products
or flammable substances (e.g. alcohol,
petrol or their derivatives). Do not wash
the device with water, hazard of fire or
electric shock with the risk of serious
injury or death.
WARNING Only clean the device when
it is DISCONNECTED from both the
domestic charging port and the charging
port located on the car.
LABEL ON THE DOMESTIC PLUG END OF
CABLE
Refer to the handbook before use.