Jeep AVENGER 2023, Owner'S Handbook Manual

Page: 79 / 300

77
Lamp Meaning
Automatic Parking Brake deactivated
Fixed: the "automatic application" (on switching off the engine) and "automatic release" (on acceleration) functions are
deactivated. If automatic application/release is no longer possible:
Start the engine.
Use the control to apply the electric parking brake.
Take your foot fully off the brake pedal.
Hold the control pressed in the release direction for between 10 and 15 seconds.
Release the control.
Depress and hold the brake pedal.
Pull the control in the application direction for 2 seconds.
Release the control and the brake pedal.
Anti-lock braking system (ABS) fault
Fixed. The anti-lock braking system has a fault. The vehicle retains conventional braking. Drive carefully at moderate
speed, then go to a Jeep Dealership.
Engine self-diagnostic system
Flashing: the engine management system has a fault. There is a risk that the catalytic converter will be destroyed. You
must contact a Jeep Dealership.
Fixed: the emissions control system has a fault. The warning lamp should go off when the engine is started. Go to a Jeep
Dealership without delay.
37)
Dynamic stability control (DSC)/Traction Control (TC) OFF
Fixed: the system is deactivated. The system is reactivated automatically when the vehicle is restarted, and at speeds
above approximately 50 km/h (31 mph). At speeds below 50 km/h (31 mph), it can be reactivated manually.
Dynamic stability control (DSC)/Traction Control (TC)
Flashing: DSC/TC system regulation is activated in the event of a loss of grip or trajectory.
Fixed: the DSC/TC system has a fault. Go to a Jeep Dealership.
Emergency brake malfunction (with electric parking brake)
Fixed, accompanied by a dedicated message: emergency braking does not deliver optimal performance. If automatic
release is not available, use manual release or go to a Jeep Dealership.
Hill Start Assist fault
Fixed, accompanied by a dedicated message: the system has a fault. Go to a Jeep Dealership.