Jeep AVENGER 2023, Owner'S Handbook Manual

Page: 55 / 300

53
take the hex wrench provided (2)
fig. 91 from the tool bag in the boot
insert the key provided into housing
fig. 91 and turn it clockwise to open the
roof or anticlockwise to close the roof
WARNING
50)
Do not put your head or arms through
the sunroof while the vehicle is moving -
risk of serious injury!
51) Before operating the sunroof control
button, ensure that no object or person
might prevent the movement. Pay
particular attention to children when
operating the sunroof. If something is
trapped when operating the sunroof,
reverse the movement of the sunroof by
pressing the control button in question.
The driver must ensure that passengers
use the sunroof correctly. Any manual
intervention on the position of the sunroof
may disturb the anti-pinch device.
Perform a reinitialisation.
IMPORTANT
20) Do not open the sunroof when the
cross bars are fitted, serious risk of
damage to the motor, the glass of the
sunroof and glass opening mechanism.
21) If the sunroof is wet, following a rain
shower or washing the vehicle, wait until
it is completely dry before operating it.
Do not operate the sunroof if it is covered
by snow or ice - risk of damage! Use only
plastic scrapers to remove snow or ice
from the sunroof.
22) Regularly check the condition of the
sunroof seals (e.g. presence of dust,
dead leaves). If using a car wash, check
first that the roof is correctly closed and
keep the high-pressure jet at least 30
centimetres from the seals.
23) Never leave the vehicle with the
sunroof open.
BONNET
OPENING
52) 53) 54) 55) 56) 57)
24)
92
JJ000636
93
JJ000398
WARNING Before doing anything under
the bonnet, you must switch off the
ignition to avoid any risk of the engine
restarting automatically. Take care with
objects or clothing that could be caught
in the blades of the cooling fan or in
certain moving components - risk of
strangulation and serious injury!
Open the driver's door (for left-hand drive
versions) or the passenger door (for right-
hand drive versions).
Pull the release lever (1) fig. 94 and
return it to its original position.