Jeep AVENGER 2023, Owner'S Handbook Manual

Page: 106 / 300

SAFETY
104
144
JJ000500
145
J0A0326C
When a Universal ISOFIX child restraint
system is used, only ECE R44 "ISOFIX
Universal” (R44/03 or further upgrades)
type-approved child restraint systems
can be used (see fig. 145).
The other weight groups are covered by
specific ISOFIX child restraint systems,
which can be used only if specifically
tested for this car (see list of cars
provided with the child restraint system).
i-Size child restraint system
These child restraint systems, built and
type-approved according to the i-Size
(ECE R129) standard, ensure better
safety conditions to carry children on
board a vehicle:
the child must be transported rearward
facing until 15 months;
child restraint system protection is
increased in the event of a side collision;
the use of the ISOFIX system is
promoted to avoid faulty installation of
the child restraint system;
efficiency in the choice of the child
restraint system, which isn't made
according to weight any more but
according to the child's height, is
increased;
compatibility between the vehicle
seats and the child restraint systems is
better: the i-Size child restraint systems
can be considered as "Super ISOFIX";
this means that they can be perfectly
fitted in type-approved i-Size seats, but
can also be fitted in ISOFIX (ECE R44)
type-approved seats.
i-Size child seats have two latches that
engage on the two rings fig. 143.
These i-Size child seats also have:
either an upper strap that is attached
to ring fig. 148.
or a support leg that rests on the
vehicle floor, compatible with the
approved i-Size seat position
Their role is to prevent the child seat
from tipping forward in the event of a
collision.
NOTE If your car seats are i-Size
approved, the symbol shown in fig. 146
will appear on the seats near the ISOFIX
attachments.
146
JJ000157
Top-tether anchors
147
JJ000501
Top-tether anchors fig. 147 (front seat),
fig. 148 (rear seats) are marked with the
symbol
for child seat.