Jeep AVENGER 2023, Owner'S Handbook Manual

Page: 202 / 300

IN CASE OF EMERGENCY
200
Fitting the spare wheel
274
JJ000275
WARNING The spare wheel is secured
by the conical contact of each bolt if
the wheel bolts for the alloy wheels are
used (fig. 274). In this case, the washers
do not come into contact with the spare
wheel.
Disengage wheel bolt caps (where
present) with the wheel bolt cover
remover. Steel wheels with cover: Pull off
the wheel cover
275
JJ000633
remove the antitheft bolt (where
provided) with the dedicated tool
attach the wheel wrench and loosen
each wheel bolt by half a turn fig. 275.
The wheels might be protected by
locking wheel nuts (optional). To loosen
these specific nuts first attach the
adapter onto the head of the nut before
installing the wheel wrench. The adapter
is located in the tool bag
before positioning the jack, take care
to remove the cover in the lifting point
fig. 276 by acting on the fastening
buttons using a special tool (screwdriver)
contained in the equipment of the car.
After removing the jack, be sure to
reapply the cover
276
JJ000402
277
JJ000640
ensure the jack is correctly positioned
under the relevant vehicle jacking point