Jeep AVENGER 2023, Owner'S Handbook Manual

Page: 135 / 300

133
MANUAL TRANSMISSION
162) 163) 52)
(where provided)
173
JJ000515
To engage reverse, depress the clutch
pedal, pull the ring (1) fig. 173 under
the selector lever and move the selector
lever quite to the left and front.
If the gear does not engage, set the
selector lever to neutral, release the
clutch pedal and depress again. Then
repeat gear selection.
Do not slip the clutch unnecessarily.
When operating, depress the clutch
pedal completely. Do not use the pedal
as a foot rest.
When clutch slip is detected for a
specific time, the engine power will be
reduced. A warning is displayed in the
instrument panel display. Release the
clutch.
WARNING
162) Press the clutch pedal fully to shift
gears correctly. It is therefore essential
that there is nothing under the pedals:
make sure the mats are lying flat and do
not get in the way of the pedals.
163) Never leave children unattended in
the vehicle. Always remove the ignition
key when leaving the vehicle and take it
out with you.
IMPORTANT
52) Do not drive with your hand resting on
the gear lever as the force exerted, even if
slight, could lead over time to premature
wear of the gearbox internal components.
ELECTRIC DRIVE UNIT
(Electric versions)
163)
OPERATION
174
JJ000460
The vehicle uses an Electric Drive Unit
with a 1-gear transmission. Push the
buttons fig. 174:
P : park position, wheels are locked,
engage only when the vehicle is
stationary, engaged automatically when
driver's door is opened or engine is
switched off
R : reverse gear, engage only when the
vehicle is stationary
N : neutral
D : drive mode, low recuperation (first
push)
B : regenerative braking (second push)
The mode is shown in the instrument
panel display (1) fig. 175.