Jeep AVENGER 2023, Owner'S Handbook Manual

Page: 63 / 300

61
114
JJ000606
1. Remove all objects from the charging
device.
2. Place the mobile device with the
display facing upwards on the charging
area, (1) fig. 114. Place the device in its
centre.
When the portable device is detected,
the charger’s indicator LED (2) fig. 114
lights up green. It remains lit for the
whole time that the battery is being
charged.
Status LED
The LED indicates the current charging
status.
Illuminates green
A compatible portable device detected
and the mobile device is charging.
Flashes orange
The mobile device has not been centred
properly in the charging zone or an
unknown object has been detected in the
charging zone.
Fixed orange
There is a problem with the mobile
device's battery, device battery
temperature too high or a fault of the
inductive charger has been detected.
If the indicator lamp is fixed orange:
remove the device, then place it back
in the centre of the charging zone
or
remove the device and try again in a
quarter of an hour
If the problem persists, have the system
checked by a Jeep Dealership.
SHARK FIN ANTENNA
A ventilation grille is present at the
rear of the roof for cooling the shark fin
antenna fig. 115. Any ventilation noise
produced, with the ignition on or the
engine running, is completely normal.
115
JJ000671
WARNING
62) Do not store heavy or sharp objects in
the storage compartments.
63) Do not travel with the glovebox open:
it may injure the front seat occupants in
the event of an accident.
64) Inductive charging can affect the
operation of implanted pacemakers or
other medical devices. If applicable, seek
medical advice before using the inductive
charging device.
65) Do not leave metal objects (e.g.
coins, keys, vehicle remote control) in
the charging area while a device is
being charged - risk of overheating or
interrupting the charging!
IMPORTANT
28) The use of multiple wireless functions
on the smartphone at the same time
(Apple CarPlay/Android Auto and wireless
charging), as indicated by the smartphone
manufacturers, could cause it to overheat,
resulting in a limitation of the active
functions or its turning off. In this case, it
is recommended to connect the system
using the USB socket.
To charge a mobile device: