The User Manual of JAC200 Series General Frequency Converter
- 95 -
Set value
Function
Description
the limited value, the frequency converter is in the state of
under speed protection. At the same time, signal ON is
output.
15
Ready for operation
When the primary loop and control loop power of the
frequency converter gets stable, and the frequency
converter is in a running-able state with no failure
detected, signal ON is output.
16
Reserved
Reserved
17
Upper frequency arrival
When the operation frequency reaches the upper
frequency, signal ON is output.
18
Lower frequency arrival (no
output when stopping)
When the operation frequency reaches the lower
frequency, signal ON is output. Signal OFF is output
when it stops running.
19
Under voltage state output
When the frequency converter is in an under voltage state,
signal ON is output.
20
Communication reference
Please refer to the communication protocol.
21
Reserved
Reserved
22
Reserved
Reserved
23
Zero-speed running 2(also
output when stopping)
When the output frequency of the frequency converter is
0, signal ON is output. Signal ON is output also when it
stops running.
24
Accumulated power-on time
arrival
When the accumulated power-on time (F7-13) exceeds the
time set by F8-16, signal ON is output.
25
Frequency level detection for
FDT2 output
Please refer to the description of function codes F8-28 and
F8-29.
26
Frequency 1 arrival output
Please refer to the description of function codes F8-30 and
F8-31.
27
Frequency 2 arrival output
Please refer to the description of function codes F8-32 and
F8-33.
28
Current 1 arrival output
Please refer to the description of function codes F8-38 and
F8-39.
29
Current 2 arrival output
Please refer to the description of function codes F8-40 and
F8-41.
30
Timing arrival output
When timing function selection (F8-42) is valid, signal
ON is output after the running time of the frequency
converter reaches the set timing time.
31
AI input overlimit
When the value of analog input AI is greater than that of
F8-46(AI input protection upper limit) or less than that of
