The User Manual of JAC200 Series General Frequency Converter
- 31 -
Function
code
Name
Set range
Default
value
Chan
ge
28: The arriving output of current 1
29: The arriving output of current 2
30: The output of timing arriving
31: Input overlimit of AI
32: During offload
33: During the forward running
34: The state of zero current
35: The arriving of module temperature
36: The overlimit of input current
37: The arriving of lower limiting
frequency (output at the time of shutdown)
38: The alarm output (all failures)
39: The pre-alarm for the over-temperature
of motor
40: The arriving of the run time
41: The output of failures (Be the failure of
free
stop
and
no
output
in
undervoltage )
F5-07
The selection of AO1
output function
0: Operation frequency
1: Set frequency
2: Output current
3: Output torque (absolute value of torque)
4: Output power
5:
Output voltage
6: Reserved
7: AI1
8:
Reserved
9:
Key
potentiometer
10: Length
11: Count value
12:
Communication reference
13: Motor speed
14: Outpput current (100.0% corresponds
to 1000.0 A)
15: Outpput voltage (100.0% corresponds
to 1000.0 V)
16: Outpput torque (the actual value of
torque)
17: Outpput frequency converter (the actual
value of torque)
0
☆
F5-10
Zero offset
coefficient of AO
-100.0%
～
+100.0%
0.0%
☆
F5-11
AO gain
-10.00
～
+10.00
1.00
☆
F5-18
The delay time of
RELAY output
0.0s
～
3600.0s
0.0s
☆
