The User Manual of JAC200 Series General Frequency Converter
- 148 -
U0-06
Output torque
Display range
-200.0%
~
200.0%
Display output torque for frequency converter during operation.
U0-07
DI input state
Display range
0
~
32767
Display input state value of current DI terminal. After the data are transformed into binary system, every bit
corresponds to a DI input signal. If the digital is 1, the input is high level signal while if the digital is 0, the
input is low level signal. The corresponding relation between every bit and input terminal is displayed as
follows:
Bit0
Bit1
Bit2
Bit3
DI1
DI2
DI3
DI4
Bit4
Bit5
Bit6
Bit7
DI5
DI6
DI7
DI8
Bit8
Bit9
DI9
DI10
U0-08
DO output state
Display range
0
~
1023
Display output state value of current DO terminal. After the data are transformed into binary system, every
bit corresponds to a DO input signal. If the digital is 1, the input is high level signal while if the digital is 0,
the input is low level signal. The corresponding relation between every bit and input terminal is displayed as
follows:
Bit0
Bit1
Bit2
Bit3
Relay
DO
Bit4
U0-14
Load speed display
Display range
0
~
65535
The display value refers to the description of F7-12.
U0-15
PID setting
Display range
0
~
65535
U0-16
PID feedback
Display range
0
~
65535
The PID set value and feedback value are displayed and the format is displayed as follows:
PID setting =PID setting (percentage) *FA-04
PID feedback =PID feedback (percentage) *FA-04
U0-19
Feedback speed
Display range
-320.00Hz
~
320.00Hz
Display practical output frequency for frequency converter.
When F0-22 (frequency instruction resolution) is 1, the display range is -3200.0Hz
~
3200.0Hz.