manualshive.com logo in svg

iPECS LIP-7004N, User Manual, Page: 92 / 586

Share
Download
iPECS LIP-7004N User Manual Download Page 92

LIP-7008D  

User 

Guide 

 

40 

8.5 

Alarm/Door Bell 

The system can monitor external 

Alarm

 or 

Door Bell

 contacts: 

Alarm Monitor

—should the external contact activate, a unique Alarm 

Ring signal and LCD display may be received.  To restart the monitor 

circuit, the external contacts must be deactivated and the Alarm Ring 

signal terminated. 

Door Bell

—a unique Door Bell Ring (single tone burst) may be received 

each time the external contact is activated.  A system contact also can 

be controlled to act as a 

Door Open 

contact. 

OPERATION

 

To terminate the Alarm signal: 

 

Dial 

565

 (

Alarm Stop

 code).  

To activate the Door Open contacts: 

 

Lift the handset, 

 

Dial 

Door Open

 code #* and contact number 1 to 4. 

NOTE—Contacts 3 & 4 are only available in the iPECS -300 & 600. 

—Contacts 1 is available in the iPECS -MG. 

 
 

8.6 

Power Fail Transfer 

When AC power to the system fails, back-up operation may be provided 

with back-up batteries or 

Power Fail Transfer

 

(PFT)

.  When battery 

back-up is provided, the station will operate normally.  When 

PFT

 is 

implemented, a SLT is connected to a CO line by the system.  This SLT 

can be used as any normal SLT, providing service while power is out. 

 
 

8.7 

System Voice Memo 

The integrated Voice Mail modules incorporate several 

Voice Memos

 to 

provide Station Users with general information such as station number, 

date, time, and feature status.  

Voice Memos

 are heard over the 

speaker of the iPECS Phone and over the handset for SLTs. 

For the 

Station Status Memo

, the following items are reported: 

ICM Signaling Mode (Handsfree/Tone/Privacy) 
Station IP Address 
Station Mac Address 
Number of messages x (x: number of all message waiting) 
Wake-Up Time (hh:mm) 
Do Not Disturb  
Forwarded to station xxx 

Summary of Contents for LIP-7004N











































































































































































































































































































































































































































































































































































































Reviews:

No comments