iPECS LIP-7004N, User Manual, Page: 197 / 586

LIP-7024LD User Guide
２８
5.3 Broker Call: Switching between two calls
You may switch between the active call and a call on
Hold
, placing the
active call on Hold acting as a broker between two or more parties,
Broker Call
. iPECS Phone users may ‘broker’ for multiple calls up to
the number of
CO/IP line
buttons.
OPERATION
To switch between two calls, Broker Call:
 Press the desired
CO/IP line
button.
5.4 Joining Multiple People in a Conference
You can establish a
Conference
with up to 3 parties (iPECS-Lik)/13
Party (iPECS-MG), or 24 parties when using a Multi-Party Conference
Interface Module (MCIM). The other parties in the
Conference
may be
internal or external.
A
Conference
can be placed on Hold and is subject to
Hold Recall
.
You may also use the Conference operation to join 2 external parties in a
private conversation. This is an
Unsupervised Conference
, which is
not subject to the normal
Hold Recall
operation.
OPERATION
To establish a Conference:
 Establish call with one of the desired conference parties,
 Select the Conf Soft button,
 Establish call with the other conference party,
 Select the Conf Soft button,

Select the Conf
Soft button again to establish the conference.
To place a Conference on Hold:
 Press the
HOLD
/
SAVE
button.
To retrieve the Conference from Hold:
 Select the Conf Soft button.
To establish an Unsupervised Conference:
 Establish conference with two external parties,
 Select the Conf
Soft button.
To retrieve an Unsupervised Conference:

Select the Conf Soft button.