iPECS LIP-7004N, User Manual, Page: 180 / 586

LIP-7024LD User Guide
１１
To select a Ring Tone from phone memory:
 Press the
TRANS
/
PGM
button,
 Dial 1 for Ring Tones,
 Dial 1 or 2 for Internal or External ring,
 Dial tone number 1-8,
 Press
HOLD
/
SAVE
to make the selection.
3.5 Answering Calls
In the Night mode,
Loud Bell Control
may be used to send ring signals
to external bells. You may answer these calls with
Universal Answer
(UA)
.
OPERATION
To answer a call ringing during night mode over an external bell:
 Lift the handset,
 Dial
567
(iPECS-Lik)/
587
(iPECS-MG)
(
UA code)
.
3.6 Answering Calls to Other Stations
When nearby stations are ringing, you may pick-up (answer) the call.
Select to answer a call ringing at a specific station (
Directed Call Pick-
Up
) or you may choose to answer the oldest call ringing to your station
group (
Group Call Pick-Up
). Assign a Flex button with the Group Call
Pick-Up code (566) for one-touch access.
NOTE—Pick-Up will not answer calls on the ringing station’s
Private Line unless the line appears on your phone.
OPERATION
To answer a call ringing at another station:
 Lift the handset,
 Dial
7 (
Directed Call Pick-Up code)
,
 Dial the Intercom Number of the ringing station; the call will be
connected.
To answer a call ringing at a station in your group:
 Lift the handset,
 Dial
566 (
Group Call Pick-Up code), the call is connected.
3.7 Using Do-Not-Disturb (DND) to Block Incoming Calls
When you need quiet, activate Do-Not-Disturb and the phone will block
incoming calls. Internal callers will receive a fast busy tone and the