manualshive.com logo in svg

iPECS LIP-7004N, User Manual, Page: 406 / 586

Share
Download
iPECS LIP-7004N User Manual Download Page 406

LIP-8012D & LIP-8024D User Guide 

 

 

58 

8.8

 

Power Fail Transfer (PFT) 

When AC power to the system fails, back-up operation 
may be provided with back-up batteries or 

Power Fail 

Transfer (PFT)

.  When battery back-up is provided the 

station will operate normally.  When 

PFT

 is 

implemented, an SLT is connected to a CO line by the 
system.  This SLT can be used as any normal SLT, 
providing service while power is out. 

 

8.9

 

System Voice Memo 

The integrated Voice Mail modules incorporate several 

Voice Memos

 to provide Station Users with general 

information such as station number, date, time, and 
feature status.  Voice Memos are heard over the iPECS 
Phone speaker and over the handset for SLTs. 
For the 

Station Status Memo

, the following items are 

reported: 

ICM Signaling Mode (Handsfree/Tone/Privacy) 
Station IP Address 
Station Mac Address 
Number of messages x (x: number of all 

message waiting) 

Wake-Up Time (hh:mm) 
Do Not Disturb  
Forwarded to station xxx 
Forwarded to speed bin xxx 
Queued CO/IP line xxx 
Locked (Temporary COS) 
COS x 
 

Summary of Contents for LIP-7004N











































































































































































































































































































































































































































































































































































































Reviews:

No comments