iPECS LIP-7004N, User Manual, Page: 55 / 586

LIP-7008D User Guide
3
2. iPECS Phone LCD & Speakerphone
2.1 LCD Operation
The Liquid Crystal Display (LCD) of the iPECS LIP-7008D Phone has
two lines of 24 characters each. The LCD is used to convey information
to you. It provides date, time and station number display while idle. It
will also provide called/calling name/number display, feature status and a
menu to guide you through
User Program
selections.
2.2 Using the Speakerphone
Activate the iPECS Speakerphone at any time (except for Paging) in
place of lifting the handset to receive or place calls. Place calls using
On-hook Dialing
; dialing while using the Speakerphone.
In addition, you may switch between the handset and Speakerphone
during a call. By keeping the handset Off-hook, you activate the
Group
Listen
feature, which provides incoming audio over the speaker with
outgoing audio from the handset. This allows a local ‘group’ to listen to
both sides of the conversation without interfering with the conversation.
While on the Speakerphone, you can
Mute
the microphone with the
MUTE
button. When Mute is active, the
MUTE
button LED will be ON. A
Flex button must be assigned for Mute operation (refer to
Section 10.2,
Assigning Features to Flex Buttons
).
With
Auto Speaker Select
, when you activate/access a feature by
pressing its button, the Speakerphone is activated automatically.
When using a
Headset
, the
SPEAKER
button controls the On/Off-hook
state for the phone.
OPERATION
To activate the Speakerphone to answer or place a call:
 Press
SPEAKER
; the phone will go off-hook presenting audio from the
speaker and to the microphone.
To control the volume of the Speakerphone or handset:
 Press ▼
VOLUME
▲ .
To Mute the microphone:
 Press
MUTE
.
To activate Group Listen while on an active handset call:
 Press
SPEAKER
.