manualshive.com logo in svg

iPECS LIP-7004N, User Manual, Page: 217 / 586

Share
Download
iPECS LIP-7004N User Manual Download Page 217

LIP-7024LD  

User 

Guide 

 

48 

9.6 

Power Fail Transfer 

When AC power to the system fails, back-up operation may be provided 

with back-up batteries or Power Fail Transfer (PFT).  When battery 

back-up is provided the station will operate normally.  When PFT is 

implemented, an SLT is connected to a CO line by the system.  This 

SLT can be used as any normal SLT, providing service while power is 

out. 

 
 

9.7 

System Voice Memo 

The integrated Voice Mail modules incorporate several Voice Memos to 

provide Station Users with general information such as station number, 

date, time, and feature status.  Voice Memos are heard over the 

speaker of the iPECS Phone and over the handset for SLTs. 

For the Station Status Memo, the following items are reported: 

ICM Signaling Mode (Handsfree/Tone/Privacy) 
Station IP Address 
Station Mac Address 
Number of messages x (x: number of all message waiting) 
Wake-Up Time (hh:mm) 
Do Not Disturb   
Forwarded to station xxx 
Forwarded to speed bin xxx 
Queued CO/IP line xxx 
Locked (Temporary COS) 
COS x 

NOTE—only activated features are announced. 

 

OPERATION

 

To hear Date & Time memo: 

 

Dial Voice Memo feature code (

661 

for iPECS-100 or

 *661 

for 

iPECS-300 & 600,

 675-1

 for iPECS-MG), date and time memo is 

heard, “Date is May 2nd.Time is xx:xx pm”. 

To hear Station Number Prompt: 

 

Dial Voice Memo feature code (

662

 for iPECS-100 or 

*662

 for 

iPECS-300 & 600,

 675-2

 for iPECS-MG), the station number memo 

is heard, “This is station 150”. 

To hear Station Settings: 

Summary of Contents for LIP-7004N











































































































































































































































































































































































































































































































































































































Reviews:

No comments