iPECS LIP-7004N User Manual Download Page 16

Page: 16 / 586

LIP-7004N

User

Guide

OPERATION

To Camp-On (wait off-hook) for a busy station:



Dial * and wait for an answer.

To Callback (wait on-hook) for a busy station:



Press

CALL BACK

and hang-up.

To make a Voice Over announcement to a busy station:



Dial #, after splash-tone, speak.

3.1.3 To leave a Message Wait

If the called user does not answer or is in DND mode, you may leave a

Message Wait

. The called user will receive a Message Wait indication;

the MSG LED will flash.

OPERATION

To activate Message Waiting,



Dial 556(iPECS-Lik)/557(iPECS-MG) and hang-up.

Summary of Contents for LIP-7004N











































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for LIP-7004N

Reviews:

iPECS LIP-7004N, User Manual, Page: 16 / 586

Search results

Summary of Contents for LIP-7004N

Reviews: