iPECS LIP-7004N User Manual Download Page 574

Page: 574 / 586

LIP-8050V User Guide

NOTE—The mobile extension may reconnect to the transfer
by pressing the # key.
This feature is only effective with an ISDN CO line.

To register a mobile phone number:



Press

the

TRANS

PGM

button,



Dial

37,



Dial the mobile phone number,



Press

the

HOLD

SAVE

button.

To activate a registered mobile phone:



Press

the

TRANS

PGM

button,



Dial

38,



1 to activate, 0 to deactivate,



Press

the

HOLD

SAVE

button.

To place a call from the mobile extension using the iPECS System:



Dial the ISDN DID number of the station; the system will check

the Caller ID and answer the call. The user then will receive
intercom dial tone,



Place internal or external iPECS calls as normal.

To Transfer a call from the mobile extension using the iPECS:



Dial “*” while on an iPECS call,



Dial the desired extension, the call is transferred and the

mobile phone returns to idle.



Reconnect to the transfer by pressing the # key.

Summary of Contents for LIP-7004N











































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for LIP-7004N

Reviews:

iPECS LIP-7004N, User Manual, Page: 574 / 586

Search results

Summary of Contents for LIP-7004N

Reviews: