iPECS LIP-7004N User Manual Download Page 115

Page: 115 / 586

LIP-7016D/7024D

User

Guide

2.3

Using a Bluetooth Wireless Headset

The iPECS LIP-7024D may be equipped with the BTU (Bluetooth Unit)

option that lets you use a Wireless headset such as a Jabra BT-200, BT-

250 or Plantronics M3000. Using a headset permits you to move freely

around the phone within approximately 10 meters and maintain a

conversation. Before using the headset, the headset must be “paired”

with the BTU, and then the headset must be enabled for use.

Operation of the iPECS LIP-7024D with the headset is the same as with

the Speakerphone; merely use the Speaker button to go ON and OFF-

hook.

NOTE—during the pairing operation, the headset and phone should
be as close as possible but not more than 1 meter apart.

OPERATION

To pair the wireless headset to the BTU:



Press the

TRANS

PGM

button,



Dial 3,



Press the

HOLD

SAVE

button.

To enable/disable the wireless headset:



Press the

TRANS

PGM

button,



Dial 4,



Press the

HOLD

SAVE

button.

To unpair the headset:



Press the

TRANS

PGM

button,



Dial 3,



Press the

HOLD

SAVE

button.

Summary of Contents for LIP-7004N











































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for LIP-7004N

Reviews:

iPECS LIP-7004N, User Manual, Page: 115 / 586

Search results

Summary of Contents for LIP-7004N

Reviews: