manualshive.com logo in svg

iPECS LIP-7004N, User Manual, Page: 483 / 586

Share
Download
iPECS LIP-7004N User Manual Download Page 483

LIP-8040L User Guide 

 

 

 

56 

 

8.2

 

Contrast 

(iPECS-LIK)

 

LCD contrast can be adjusted to enhance viewing ability. 

 

8.3

 

Background Music and Music on Hold 

(iPECS-LIK)

 

Two audio sources can be connected to the system.  
These sources or an internal source provide input for 
Background Music (BGM) and Music On Hold (MOH).  
In addition, a recorded message from the VMIM can be 
used.  BGM is played over the speakers of the iPECS 
Phone when the station is idle.  MOH is played to callers 
placed on 

Hold

. 

There are four possible selections for BGM and MOH: 

1: Off 
2: Source BGM1 
3: Source BGM2 
4. VMIM 

message 

 

To turn on Background Music: 

 

Press 

HOLD

/

SAVE

 to cycle through the BGM selections. 

To change the LCD Contrast: 

 

While in an idle state, press the 

VOL

 

 

VOL

 

 buttons 

to adjust the brightness. 

- increase (darker) 

- decrease (brighter) 

To edit the CO code (positions 2-5 only): 

 

Use Navigation up/down buttons to highlight the 
desired item, 

 

Press the 

Edit

 Soft button to modify selection. 

To select the CO code: 

 

Use Navigation up/down buttons to highlight the 
desired item, 

 

Press the 

Select

 Soft button. 

 

Summary of Contents for LIP-7004N











































































































































































































































































































































































































































































































































































































Reviews:

No comments