iPECS LIP-7004N User Manual Download Page 315

Page: 315 / 586

LIP-8008D User Guide

3.3.2 Using and Entering Saved Number Dial

You may store the last number dialed on an external call
to the

Saved Number Dial

buffer for convenient dialing

at a later time. The Saved number is stored until a new
number is saved.

3.3.3 Using System Speed Dial Numbers

The iPECS-100 system has memory allocated for 800

System Speed Dial

numbers (bins 200-999). The

iPECS-300 & 600 systems each have memory allocated
for 3000

System Speed Dial

numbers (bins 2000-4999).

The iPECS-MG100 system has memory allocated for
1000

System Speed Dial

numbers (bins 2000-2999).

The iPECS-MG300 system has memory allocated for
2000

System Speed Dial

numbers (bins 2000-3999).

The iPECS-1200 system each have memory allocated
for 12000

System Speed Dial

numbers (bins 20000-

31999).
You may, if allowed, use

System Speed Dial

to call

frequently dialed numbers.
In some cases, these numbers are divided into groups
called

System Speed Zone Groups

. In this case, you

may access some numbers and not others and your
dialing restrictions may be invoked.
Only an Attendant can assign

System Speed Dial

numbers.

To place a call using Saved Number Dial:



Lift the handset,



Press

SPEED



Dial

To store a number in the Saved Number Dial:



While on an outgoing external call, press

SPEED

twice.

To place a call using System Speed Dial:



Lift the handset,



Press

SPEED



Dial the desired System Speed Dial bin number (200-999 for

iPECS-100 or 2000-4999 for iPECS-300 or 600 or 20000-
31999 for iPECS-1200, 2000-2999 for iPECs-MG100 , or 2000-
3999 for iPECS-MG300).

Summary of Contents for LIP-7004N











































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for LIP-7004N

Reviews:

iPECS LIP-7004N, User Manual, Page: 315 / 586

Search results

Summary of Contents for LIP-7004N

Reviews: