manualshive.com logo in svg

iPECS LIP-7004N, User Manual, Page: 534 / 586

Share
Download
iPECS LIP-7004N User Manual Download Page 534

LIP-8050V User Guide 

 

 

 

Copy from USB 

You can copy files from USB memory card that you connect to 
the back of the phone. 

 

 
You can copy image (photo) files from USB. 
The supported formats are jpg and png. 
 
 

 

1.  Please do not remove USB while in use. 
2.  If image size is over 200 Kbyte then it could not copy. 
 
 

 

 
You can copy audio files from USB. 
Support formats are MP3, AMR and WAV (CCITT u-law 8,000 
kHz, 8bit, mono). 

Summary of Contents for LIP-7004N











































































































































































































































































































































































































































































































































































































Reviews:

No comments