iPECS LIP-7004N User Manual Download Page 432

Page: 432 / 586

LIP-8040L User Guide



Mark and drill two (2) 7mm holes for plastic wall
anchors.



Insert the two (2) anchors into the holes and insert and
tighten the each screw leaving about 2.5 mm (1/8-
inch) of the screw exposed.



Slide the LIP-8000 phone over the screws and assure
the phone is secure.



NOTE—It may be necessary to remove the phone and
tighten or loosen the screws for a secure mounting.

Summary of Contents for LIP-7004N











































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for LIP-7004N

Reviews:

iPECS LIP-7004N, User Manual, Page: 432 / 586

Search results

Summary of Contents for LIP-7004N

Reviews: