manualshive.com logo in svg

iPECS LIP-7004N, User Manual, Page: 326 / 586

Share
Download
iPECS LIP-7004N User Manual Download Page 326

LIP-8008D User Guide 

 

7. Misc. Features 

 

7. 

Misc. Features 

7.1

 

Background Music and Music on Hold  (iPECS-LIK) 

Two audio sources can be connected to the system.  
These sources or an internal source provide input for 

Background Music (BGM) and Music On Hold (MOH).  
In addition, a recorded message from the VMIM can be 
used.  BGM is played over the speakers of the iPECS 
Phone when the station is idle.  MOH is played to callers 
placed on 

Hold

. 

There are four possible selections for BGM and MOH: 
1: Off 
2: Source 

BGM1 

3: Source 

BGM2 

4. VMIM 

message 

To turn on Background Music: 

 Press 

HOLD

/

SAVE

 to cycle through the BGM selections. 

 

7.2

 

Using Internal, External and Meet-Me Paging 

The User can broadcast announcements to other 
stations and/or external speakers.  Stations are 
assigned to one or more of the 

Internal Page Zones

.  

The system has two 

External Page Zones

 that can be 

connected to external speakers. 
In iPECS-LIK, Page Zone codes are: 
 

Internal Page Zones  501-510 (iPECS 100), 501-

535 (iPECS 300 & 600) 

 

Internal All Call Page  543 

 External 

Page 

Zones 

545-546 

 

External All Call Page 548 

 

All Call Page  

549 

In iPECS-MG, Page Zone codes are: 
 

Internal Page Zones :  

 

 

543 + Zone No(01~15) (iPECS-MG100) 

 

 

543 + Zone No(01~30) (iPECS-MG300) 

 

Internal All Call Page  543 + 00 

 External 

Page 

Zones 

548 

 

All Call Page  

549 

 
 

33 

 

Summary of Contents for LIP-7004N











































































































































































































































































































































































































































































































































































































Reviews:

No comments