manualshive.com logo in svg

iPECS LIP-7004N, User Manual, Page: 296 / 586

Share
Download
iPECS LIP-7004N User Manual Download Page 296

LIP-8008D User Guide 

 

 

DND – 

Blocks all incoming calls; red LED illuminates. 

Speed – 

Access speed dialing, speed programming. 

Vol 

 

 – 

Adjusts volume for ringing, headset, and 

speakerphone; adjusts LCD brightness (in idle state). 

Trans/PGM –C

all transfer, or programming mode. 

Hold/Save – 

Places active call on hold or saves 

programming information. 

Call Back – 

Initiates call back request when calling a 

busy station; call is completed when busy station returns 
to idle status. 

Speaker

 – Allows User to place a call while on-hook. 

Toggle to activate; red LED illuminates. 

Flexible –

 Some are system pre-programmed for line 

appearance, and some are user programmable. 

Ring/MSG Indicator – 

Illuminates when ringing, or 

message waiting. 

LCD Display – 

Phone interface for status, dialing 

directories, and text message information. 

Soft Buttons – 

Used with fixed and flexible features; 

use changes in relation to LCD display 

Hands-free Microphone – 

Used for hands-free 

speakerphone function. 

 
 

1.5

 

LIP-8008D Phone Installation 

LIP Phones can be connected to any standard 10/100 
Base-T Ethernet switch port (shown in graphic).  When 
connected to an 802.3af compliant switch port (ex., 
POE8), LIP Phones obtain power from the Ethernet port.  
When LAN power is available, do not use AC/DC 
adaptor. When LAN power is not available, the AC/DC 
adaptor must be used. The following image shows how 
to connect the handset, power cord, and LAN cable to 
the phone. 
 
 
 
 
 
 
 
 
 
 

 
 

3 

 

Summary of Contents for LIP-7004N











































































































































































































































































































































































































































































































































































































Reviews:

No comments