manualshive.com logo in svg

iPECS LIP-7004N, User Manual, Page: 273 / 586

Share
Download
iPECS LIP-7004N User Manual Download Page 273

LIP-8004D User Guide 

 

 

 

7.6  Power Fail Transfer 

When AC power to the system fails, back-up operation 
may be provided with back-up batteries or 

Power Fail 

Transfer (PFT)

.  When battery back-up is provided the 

station will operate normally.  When 

PFT

 is implemented, 

an SLT is connected to a CO line by the system.  This 
SLT can be used as any normal SLT, providing service 
while power is out. 

 

7.7  System Voice Memo 

The integrated Voice Mail modules incorporate several 

Voice Memos

 to provide Station Users with general 

information such as station number, date, time, and 
feature status.  Voice Memos can be heard over the 
speaker of the iPECS Phone and over the handset for 
SLTs. 
For the 

Station Status Memo

, the following items are 

reported: 
ICM Signaling Mode (Handsfree/Tone/Privacy) 
Station IP Address 
Station Mac Address 
Number of messages x (x: number of all message 

waiting) 

Wake-Up Time (hh:mm) 
Do Not Disturb  
Forwarded to station xxx 
Forwarded to speed bin xxx 
Queued CO/IP line xxx 
Locked (Temporary COS) 
COS x 

NOTE—Only activated features are announced. 

 

To hear Date & Time memo: 

 
 

  Dial the Voice Memo code (661 for iPECS-100, or *661 for iPECS-

300 & 600, or 675+1 for iPECS-MG), 

 
 

  Date and Time memo is heard, “Date is May 2nd.Time is xx:xx pm”. 

 

To hear Station Number Prompt: 

 

  Dial Voice Memo code (662 for iPECS-100, or *662 for iPECS-300 & 

600, or 675+2 for iPECS-MG), 

 
 
 

  The Station Number memo is heard, “This is station 150”. 

 

To hear Station Settings: 

 

  Dial Voice Memo code (663 for iPECS-100, or *663 for iPECS-300 & 

600, or 675+3 for iPECS-MG), 

 
 

  Station Status Memo is heard.

 

35 

 

Summary of Contents for LIP-7004N











































































































































































































































































































































































































































































































































































































Reviews:

No comments