iPECS LIP-7004N, User Manual, Page: 516 / 586

LIP-8050V User Guide
1.5.2 Wall Mount
The LIP-8000 series phones can be wall mounted as needed.
The following instructions describe how to perform a wall mount
installation. For more detailed instruction, refer to the
iPECS
Hardware Description and Installation Manual
.

Mark and drill two (2) 7mm holes for plastic wall
anchors.

Insert the two (2) anchors into the holes and insert and
tighten the each screw leaving about 2.5 mm (1/8-inch)
of the screw exposed.

Slide the LIP-8000 phone over the screws and assure
the phone is secure. It may be necessary to remove the
phone and tighten or loosen the screws for a secure
mounting.

Remove the Handset hook from the phone as shown in
the figure below. Reverse the hook and re-install in the
LIP-8000 phone so that the hook catches the groove in
the handset receiver.