iPECS LIP-7004N, User Manual, Page: 178 / 586

LIP-7024LD User Guide
９
While busy, certain stations can activate
Voice-Over
to your phone. In
this case, audio is received from both the active call and the
Voice Over
announcement at the same time.
Respond to any of these
Off-hook Signals
in one of several ways; place
the existing call on
Hold
and respond to the new incoming call, activate
One-time DND ,
send a
Silent Text Message
, or ignore the new call.
Silent Text Message
requires a
TEXT MESSAGE
button, and cannot be sent
to a SLT or other non-display terminal.
The Attendant or Secretary may use
Intrusion
to announce a call while
you are busy.
OPERATION
To answer a Call Waiting:
 Press
HOLD
/
SAVE
and/or,
 Press the flashing
CO
/
IP LINE
button.
To activate One-time DND:
 Press the
DND
button.
To send a Silent Text Message:
 Press the programmed
TEXT MESSAGE
button,
 Select the desired message to send.
3.3 Using Answering Machine Emulation (AME)
When a call is connected to your voice mail, you can screen the call as
with a normal Answering Machine. The caller’s voice is played over
your speaker while the message is being recorded. There are two
methods of notification and call screening provided, Ring or Speaker
mode.
Ring mode(iPECS-Lik)/LED Blink mode(iPECS-MG)
—the AME
(Answering Machine Emulation) Flex button will flash to notify you of a
call. You may press the Flex button to hear the caller as the voice
message is stored.
Speaker mode
—when the call is sent to the voice mailbox, the caller’s
voice is automatically broadcast over the speaker of your iPECS Phone.
You may terminate screening, leaving the caller in voice mail to record a
message, talk with the caller and record the conversation in the mailbox,
or answer the call and disconnect the Voicemail. The AME feature is
only available when using the iPECS VMIM/VSF Voice Mail; a
M
UTE
and
AME
button are required.
OPERATION
In iPECS-Lik