iPECS LIP-7004N User Manual Download Page 90

Page: 90 / 586

LIP-7008D

User

Guide

NOTE—BGM is not supported in iPECS-MG.

8.2

Using Internal, External and Meet-Me Paging

The User can broadcast announcements to other stations and/or

external speakers. Stations are assigned to one or more of the

Internal

Page Zones

. The system has two

External Page Zone

s that can be

connected to external speakers.

Page Zone codes in iPECS-Lik are:

1: Internal Page Zones

iPECS 100: 501-510

iPECS 300 & 600: 501-535

2: Internal All Call Page

543

3: External Page Zones

545-546

4: External All Call Page 548
5: All Call Page

549

Page Zone codes in iPECS-MG are:

Internal Page Zones :

543 + Zone No(01~15 ) (iPECS-MG100)

543 + Zone No(01~30) (iPECS-MG300)

Internal All Call Page

543 + 00

External Page Zone

548

All Call Page

549

If the desired Page Zone is busy, the User can elect to be recalled when

their turn comes in the queue. Users can also request a paged party

answer the Page using

Meet-Me Paging

. In this case, the paged party

may answer the page from any phone in the system by dialing the Meet-

Me code.

OPERATION

To make a page:



Lift the handset,



Dial the desired Page zone,



If assigned, after page warning tone, make announcement.

To queue for a page when busy is received:



Press

CALL BACK



Replace the handset returning to idle.

To answer a Meet-me-Page:



Lift the handset,



Dial the Meet-Me-Page code

544

(iPECS-Lik)/

546

(iPECS-MG).

Summary of Contents for LIP-7004N











































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for LIP-7004N

Reviews:

iPECS LIP-7004N, User Manual, Page: 90 / 586

Search results

Summary of Contents for LIP-7004N

Reviews: