iPECS LIP-7004N User Manual Download Page 149

Page: 149 / 586

LIP-7016D/7024D

User

Guide

To access the Call Log menu;



Press LOG button of 3 soft key or Press the

CALL LOG

button.

STATION 101 (T)

14 SUN 04 14:30

LOG DIR REDIAL





Using the Soft keys, select the desired call log (incoming, outgoing,

or missed).

>01



101



4504600

SEND SELECT EXIT





Use Navi Up and Down keys to view the log contents.





Outgoing Call





Incoming Call



M Missed Call

8.2

Background Music and Music on Hold

Two audio sources can be connected to the system. These sources or

an internal source provide input for Background Music (BGM) and Music

On Hold (MOH). In addition, a recorded message from the VMIM can

be used. BGM is played over the speakers of the iPECS Phone when

the station is idle. MOH is played to callers placed on

Hold

There are four possible selections for BGM and MOH:

1: Off
2: Source

BGM1

3: Source

BGM2

4. VMIM

message

NOTE—BGM is not supported in iPECS-MG.

OPERATION

To turn on Background Music:



Press

HOLD

SAVE

to cycle through the BGM selections.

8.3

Using Internal, External and Meet-Me Paging

The User can broadcast announcements to other stations and/or

external speakers. Stations are assigned to one or more of the Internal

Summary of Contents for LIP-7004N











































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for LIP-7004N

Reviews:

iPECS LIP-7004N, User Manual, Page: 149 / 586

Search results

Summary of Contents for LIP-7004N

Reviews: