iPECS LIP-7004N, User Manual, Page: 179 / 586

LIP-7024LD User Guide
１０
To assign an AME button:
Ring Mode –

TRANS
/
PGM
+
FLEX
+ 564 + 0 +
HOLD
/
SAVE
Speaker Mode –

TRANS
/
PGM
+
FLEX
+ 564 + 1 +
HOLD
/
SAVE
To screen a call in Ring mode:
 Press the flashing
AME
button, the caller’s voice is broadcast over the
station speaker and stored in the voice mailbox (in the Speaker
mode, broadcast is automatic).
To stop the voice broadcast and leave the caller in Voice Mail:
 Press the illuminated
SPEAKER
button.
To talk with the caller and record the conversation in Voice Mail:
 Press the Mute Soft button.
To answer the call and cancel the voice message recording:
 Press the illuminated
AME
button, the caller is connected and the
Voice Mail disconnected.
In iPECS-MG
To assign an AME button:
LED Blink Mode –

TRANS
/
PGM
+
FLEX
+ 524 + 1 +
HOLD
/
SAVE
Speaker Hearing Mode –

TRANS
/
PGM
+
FLEX
+ 564 + 2 +
HOLD
/
SAVE
3.4 Differential Ring Signals
When multiple phones in a small area ring, it can be difficult to tell which
are ringing. The iPECS Phone has 14
Ring Tones
available for
differentiating ring from one phone to another. Four of the tones are
stored in the phone’s permanent memory; the remaining ten tones are in
the system’s memory. Four of these ten can be downloaded into the
phone memory for use as the 5
th
to 8
th
Ring Tone
.
OPERATION
To download a Ring Tone from System memory:
 Press
TRANS
/
PGM
,
 Dial 1 for Ring Tones,
 Dial 5 for Ring Tone download,
 Dial the phone’s memory location to receive the tone (5-8),
 Dial tone number 0-9, tone is heard,
 Press
HOLD
/
SAVE
to download.