iPECS LIP-7004N User Manual Download Page 298

Page: 298 / 586

LIP-8008D User Guide

1.5.3 Wall Mount

The LIP-8000 series phones can be wall mounted as
needed. The following instructions detail how to perform
a wall mount installation:



Mark and drill two (2) 7mm holes for plastic wall anchors.



Insert the two (2) anchors into the holes and insert and tighten

each screw leaving about 2.5 mm (1/8-inch) of the screw
exposed.



Slide the LIP-8000 phone over the screws and assure the

phone is secure.



NOTE—It may be necessary to remove the phone and tighten

or loosen the screws for a secure mounting.



For the wall-mounting, sleeve of the CAT5 cable should be

moved backward to prevent it protrude.

Summary of Contents for LIP-7004N











































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for LIP-7004N

Reviews:

iPECS LIP-7004N, User Manual, Page: 298 / 586

Search results

Summary of Contents for LIP-7004N

Reviews: