iPECS LIP-7004N, User Manual, Page: 447 / 586

LIP-8040L User Guide
20
the Flex button to hear the caller as the voice message
is stored.
Speaker mode(iPECS-Lik)/Speaker Hearing
Mode(iPECS-MG)
—when the call is sent to the voice
mailbox, the caller’s voice is automatically broadcast
over the speaker of your iPECS Phone.
You may terminate screening, leaving the caller in voice
mail to record a message, talk with the caller and record
the conversation in the mailbox, or answer the call and
disconnect the Voicemail. The AME feature is only
available when using the iPECS VMIM/VSF Voice Mail;
a M
UTE
and AME button should be programmed (refer
to Appendix A User Program Codes).
3.4 Differential Ring Signals
When multiple phones in a small area ring, it can be
difficult to tell which are ringing. The iPECS Phone has
14
Ring Tones
available for differentiating one phone’s
ringing from another. Four of the tones are stored in the
phone permanent memory; the remaining ten tones are
in the system memory. Four of these ten can be
downloaded into the phone memory for use as the 5
th
to
8
th
Ring Tone
.
To screen a call in Ring mode(iPECS-LIK)/LED blink
mode(iPECS-MG):
 Press the flashing
AME
button, the caller’s voice is
broadcast over the station speaker and stored in the
voice mailbox (in the Speaker mode, broadcast is
automatic).
To stop the voice broadcast and leave the caller in Voice
Mail:
 Press the illuminated
SPEAKER
button.
To talk with the caller and record the conversation in
Voice Mail:
 Press the
MUTE
button.
To answer the call and cancel the voice message
recording:
 Press the illuminated
AME
button, the caller is
connected and the Voice Mail disconnected.