iPECS LIP-7004N User Manual Download Page 72

Page: 72 / 586

LIP-7008D

User

Guide



Press

SPEED



Dial

To store a number in the Save Number Dial:



While on an outgoing external call, press

SPEED

twice.

4.3.3 Using System Speed Dial Numbers

The iPECS-100 system has memory allocated for 800

System Speed

Dial

numbers (bins 200-999), for iPECS-MG 100(2000-2999). The

iPECS-300 & 600, iPECS-MG 300 systems each have memory allocated

for 3000 System Speed Dial numbers (bins 2000-4999). You may, if

allowed, use the

System Speed Dial

to dial frequently called numbers.

In some cases, these numbers are divided into groups called

System

Speed Zone Groups

. In this case, you may access some numbers and

not others and your dialing restrictions may be invoked.

Only an Attendant can assign

System Speed Dial

numbers.

OPERATION

To place a call using System Speed Dial:



Lift the handset, or press the

Speaker

button,



Press

Speed



Dial the desired System Speed Dial bin number (200-999 for iPECS-

100, 2000-4999 for iPECS-300 & 600, 2000-2999 for iPECS-MG100,

2000-4999 for iPECS-MG300).

4.3.4 Using and Entering Station Speed Dial Numbers

Each station in the iPECS-100 is allocated memory for 20

Station

Speed Dial

numbers (bins 00-19) each up to 48 digits. The iPECS-300

& 600 support 100

Station Speed Dial

numbers (bins 000-099). The

iPECS-MG 100 & 300 each support 50

Station Speed Dial

numbers

(bins (00-49). These numbers are entered at the user’s station and may

include several ‘special’ instructions. Special instructions and the

corresponding button are:

‘

’ –

Pause,

system will momentarily stop dialing.

LASH

as 1

digit

–

activate dial tone detect.

FLASH

not as 1

digit

–

the system will generate a

flash on the CO

line

CALL BACK

as 1

digit

–

Send digits as

ISDN Keypad Facility

message

‘*’

as 1

digit

- Display Security,

the stored number will not be

displayed when used.

Summary of Contents for LIP-7004N











































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for LIP-7004N

Reviews:

iPECS LIP-7004N, User Manual, Page: 72 / 586

Search results

Summary of Contents for LIP-7004N

Reviews: