iPECS LIP-7004N User Manual Download Page 487

Page: 487 / 586

LIP-8040L User Guide

ICM Signaling Mode (Handsfree/Tone/Privacy)
Station IP Address
Station Mac Address
Number of messages x (x: number of all

message waiting)

Wake-Up Time (hh:mm)
Do Not Disturb
Forwarded to station xxx
Forwarded to speed bin xxx
Queued CO/IP line xxx
Locked (Temporary COS)
COS x

NOTE—only activated features are announced.

8.10

Hot Desk

iPECS phones in the system may be assigned for

Hot

Desk

operation. These Hot Desk phones let you log-on

and use the Hot Desk phone as if it were your station.

To hear Date & Time memo:



Dial the Voice Memo code (661 for iPECS-100, or *661
for iPECS-300 & 600, or 675+1 for iPECS-MG),



Date and Time memo is heard, “Date is May 2nd.Time
is xx:xx pm”.

To hear Station Number Prompt:



Dial Voice Memo code (662 for iPECS-100, or *662 for
iPECS-300 & 600, or 675+2 for iPECS-MG),



The Station Number memo is heard, “This is station
150”.

To hear Station Settings:



Dial Voice Memo code (663 for iPECS-100, or *663 for
iPECS-300 & 600, or 675+3 for iPECS-MG),



Station Status Memo is heard.

Summary of Contents for LIP-7004N











































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for LIP-7004N

Reviews:

iPECS LIP-7004N, User Manual, Page: 487 / 586

Search results

Summary of Contents for LIP-7004N

Reviews: