iPECS LIP-7004N, User Manual, Page: 503 / 586

●
IP KEY TELEPHONE SYSTEM / SLT User Guide iPECS-50/100/300/600/1200
SLT User Guide for iPECS System
For Follow Me call forward
●
Go to the forwarding station and lift handset.
●
Dial 5 5 4 .
●
Dial 0 .
●
Dial the station number that calls are to be
forwarded.
●
Dial the authorization code of forwarded station.
(The authorization code should be registered
before "Follow Me" Call Forward can be set.)
●
Dial the Forward condition.
●
Dial the destination station, station group .
or dial CO access code (9, 8xx, 88xx)
and desired external phone number.
●
Press the hook-switch, receive confirmation tone.
●
Hang up.
Do Not Disturb (DND)
●
Lift handset.
●
Dial 5 5 3 .
●
Place the handset.
To cancel Do Not Disturb,
●
Lift handset.
●
Dial 5 5 9.
●
Hang up.
Broker Call
●
An extension user engaged in an internal or
external call, should briefly press hook switch to
hold a call.
●
The holding party hears music on hold. (If equipped)
●
Dial the second number of another internal or
external call.
●
When the second call is connected, the extension
user may alternate the call between holding
parties by pressing hook switch.
●
Then, you may make a conference by pressing
hook switch twice in 2 seconds.
Universal Night Answer
When hearing an incoming signal on other phone or
night bell
,
●
Lift handset.
●
Dial UNA Access Code 5 6 7 .
●
You will be connected to an incoming call if it was
programmed as an UNA line.
Returning Call to Host System
If your iPECS system is connected to another system, you
can use this feature to transfer a call back to an
extension on the other system.
(Your installer will tell you need the feature.)
●
While connected to an extension call, press
hook switch.
●
Dial 5 5 1, Flash Command To CO Line Code.
●
Hearing new dial tone from the other system, dial
the extension number on the required system.
●
When the station answers, (See Screened Transfer)
speak or hang up (See Unscreened Transfer) to
transfer the call.
Establishing a Conference
The system allows you to set up a 3-way conference.
●
Lift handset.
●
Call the desired party. (outside or internal)
●
Press hook switch.
●
Dial the internal extension number.
●
When the other party answers, press hook switch
twice in 2 seconds.
(All three parties are now connected.)
Message Waiting
●
Lift handset.
●
Dial the desired extension number.
●
No reply from a key station or extension busy tone
from a SLT key station.
●
Press hook switch.
●
Dial 5 5 6 , the Message Wait/Call Back code.
●
Hang up.
Call Forward
●
Lift handset.
●
Dial 5 5 4 .
●
Dial the desired call forward number.
1 - Unconditional, 2 - Busy calls
3 - No answer calls, 4 - Busy/no answer calls
5 - Incoming outside line to off-net (ATD only)
6 - Off-net Unconditional (SLT only)
7 - Off-net Busy calls (SLT only)
8 - Off-net No answer calls (SLT only)
9 - Off-net Busy/no answer calls (SLT only)
# - Cancel previous forward
●
Dial the station number to forward incoming calls to.
iPECS-50 : 100~149 / 620~659
iPECS-100 : 100~169 / 620~659
iPECS-300 : 100~399 / 620~667
iPECS-600 : 1000~1599 / 620~667
iPECS-1200: 1000~2199 / 401~500
●
Hang up.
●
To cancel Call Forward, lift handset and dial 5 5 4
and # .
2