2 Installation
- 28 -
NOTE
◆
When fixing the two screws in the lower middle, insert the screwdriver
through the holes of the clasp of the power terminals. The recommended
Philips screwdriver model is slot 3# and rod length is greater than or
equal to 190 mm.
■
Backplate mounting of the vertical tower drive unit (180 mm wide)
Figure 2-5 Backplate mounting of MD810-50M4T90G to MD810-50M4T160G
3 Through-hole mounting
■
Through-hole mounting brackets
1
1
2
2
3
3
4
4
1
1
2
2
3
3
4
4
1
Upper and lower through-hole m
ounting brackets of 50 mm wide unit
2
Upper and lower through-hole mounting brackets of 100 mm wide unit
3
Upper and lower through-hole mounting brackets of 200 mm wide unit
4
Upper and lower through-hole mounting brackets of 300 mm wide unit
