Incite Fire ASD 532, Operating Manual

Page: 99 / 121

Operation
99 / 121
8.5.4 Displaying and reading out the event memory
The event memory can be called up via switch position E . Up to 99 events can be stored in the event memory ( E01 to E99 ),
with event E01 as the latest (more recent) event. If the memory exceeds 99 events, the oldest event is deleted. The event
memory as a whole can be deleted only by the manufacturer.
Events are subdivided into groups ( G00 to G99 ) so they can be displayed using the 3 digits of the segment display. For each
event group, up to 8 events can be displayed as a 3-digit code. The codes are added together and displayed if there are multi-
ple pending events per event group.
8.5.4.1 Procedure and interpretation of the event memory display
The sequence below provides an example to illustrate how the next to last event, i.e. the second most recent event, is read out
(
E02 ). The result shows that the smoke sensor alarm has triggered.
Measure Display Procedure / remarks
(1) Briefly press the “UP” key on the
AMB 32 flashing, e.g. b21 or other
•
When commissioning, display of the switch set-
tings
A11 to C31 , W01 to W44 , X01 to X03
(2) Press the “UP” key again (4 x) until
display reads
E
in succession A / b / C / E
•
Displays the switch position group E
(3) Press the “OK” key E01
•
Selects event E01 (last, i.e. most recent)
(4) Press the “UP” key E02
•
Even selection E02 (next to last)
(5) Press the “OK” key flashing after approx. 2 s, e.g. G10
•
Displays the event group G10 , smoke sensor
events
(6) Wait flashing after approx. 2 s, e.g. 001

•
Displays event codes 001 , smoke sensor alarm
Notice

Multiple codes : If pre-signals 1 to 3 preceded the alarm release of smoke sensor, Point (6) will display code
057 as the result. It consists of the individual codes (added together) 001 (alarm), 008 (pre-signal 1), 016 (pre-
signal 2) and 032 (pre-signal 3).
Please refer to Sec. 8.5.4.2 and 8.5.4.3 for a list of all the event groups and their events (codes).
ASD532 Operating Manual