Incite Fire ASD 532, Operating Manual

Page: 115 / 121

Faults
115 / 121
Continuation:
G70, RIM 1, RIM 2 faults
Code Meaning Check: Possible causes and remedy:
001 Fault RIM 1 Ribbon cable connection
Module
•
Ribbon cable not correctly attached or
defective

check, replace
•
Module removed and not logged off
•
Module defective

replace
016 Fault RIM 2
064 Incompatible RIM fault Note the production version,
should be greater than 181214
•
Replace RIM
128 RIM fault, too many RIMs Number of RIMs
•
Only 2 RIM permitted!
G71, XLM faults
Code Meaning Check: Possible causes and remedy:
016 Fault XLM Ribbon cable connection
Module
•
Ribbon cable not correctly attached or
defective

check, replace
•
Module removed and not logged off
•
Module defective

replace
064 XLM fault, too many XLMs Number of XLMs
•
Only 1 XLM permitted!
G72, SD memory card / SIM faults
Code Meaning Check: Possible causes and remedy:
001 SD memory card fault, missing or defec-
tive SD memory card
•
SD memory card was removed without
logging off
•
SD memory card defective

replace
016 Fault SIM Ribbon cable connection
Module
•
Ribbon cable not correctly attached or
defective

check, replace
•
Module removed and not logged off
•
Module defective

replace
064 SIM fault, too many SIMs Number of SIMs
•
Only 1 SIM permitted!
G80, AMB faults
Code Meaning Check: Possible causes and remedy:
004 Undervoltage fault Operating voltage < 13.9 VDC
Conductor cross-section
•
conductor cross-section too weak

must be enlarged
•
Voltage of the power supply not OK

check and correct if needed
008 Clock fault Lithium battery
Clock setting
•
Isolation strip still present on the lithium
battery

remove
•
Clock is not set
•
Lithium battery defective

replace
032 Invalid Autolearning parameters Autolearning configuration
AMB
•
Re-configure Autolearning
(ASD Config)
•
AMB defective

replace
064 Parameter invalid, day/night control Day/night control configuration
AMB
•
Re-configure day/night control
(ASD Config)
•
AMB defective

replace
ASD532 Operating Manual