Incite Fire ASD 532, Operating Manual

Page: 101 / 121

Operation
101 / 121
Continuation:
G04, general events, part 5, reset results
001 Key
002 SecuriLine
004 “ASD Config” PC program
008 External
G10, smoke sensor events
001 Smoke sensor alarm
002 Smoke sensor dust
004 Smoke sensor dirt
008 Pre-signal 1 smoke sensor
016 Pre-signal 2 smoke sensor
032 Pre-signal 3 smoke sensor
064 Alarm 2 smoke sensor
128 Alarm OEM input
G11, smoke sensor faults, part 1
001 ASD <> smoke sensor communications
002 Unknown smoke sensor type, smoke sensor
004 Response sensitivity too low, smoke sensor
008 Invalid parameters, smoke sensor
016 Fault on OEM input
G12, smoke sensor faults, part 2
001 Smoke sensor measuring chamber
002 Temperature, smoke sensor
004 Supply voltage, smoke sensor
008 EEPROM access error, smoke sensor
016 EEPROM invalid data, smoke sensor
032 Manufacturing, smoke sensor
G13, isolate smoke sensor
001 Isolated smoke sensor alarm
002 Isolate smoke sensor switched on
004 Isolate smoke sensor switched off (normal operation)
008 Isolated pre-signal 1, smoke sensor
016 Isolated pre-signal 2, smoke sensor
032 Isolated pre-signal 3, smoke sensor
064 Isolated alarm 2, smoke sensor
G14, test trigger from EasyConfig
G15, test trigger from “ASD Config”
001 Alarm test
002 Fault test
004 Pre-signal 1 test
008 Pre-signal 2 test
016 Pre-signal 3 test
032 Test alarm 2
G30, airflow monitoring sampling pipe
001 Pipe blockage, sampling pipe
002 Pipe breakage, sampling pipe
004 Invalid LS-Ü parameters, sampling pipe
008 Airflow sensor, defective / missing
G50, fan faults
001 Tacho signal missing
002 Motor regulation outside range
G60, initial reset faults
004 Initial reset time-out
008 Invalid parameters for initial reset

ASD532 Operating Manual