Incite Fire ASD 532, Operating Manual

Page: 72 / 121

Installation
72 / 121
6.5.2 Terminal assignment for eXtended Line Module XLM 35
Terminal
XLM
Signal Wiring
L1
Data A
Addressable loop
according to Fig. 35 or Fig. 38
(see also Sec. 8.5.5)
C1
GND A
G1 Screen
L2 Data B
Addressable loop
according to Fig. 35 or Fig. 38
(see also Sec. 8.5.5)
C2 GND B
G2 Screen
6.5.3 Terminal assignment for RIM 36 Relay Interface Module
RIM terminal Signal

Wiring
1
Rel. 1
“NO”
Pre-signal 1
or freely programmable
Local info or
connection to FACP input
2
“NC”
3
“COM”
4
Rel. 2
“NO”
Pre-signal 2
or freely programmable
5 “NC”
6 “COM”
7
Rel. 3
“NO”
Pre-signal 3
or freely programmable
8
“NC”
9
“COM”
10
Rel. 4
“NO”
Smoke sensor dirt
or freely programmable
11 “NC”
12 “COM”
13
Rel. 5
“NO”
Sampling tube blockage
or freely programmable
14
“NC”
15
“COM”
Notice

The assignment of individual or all relays can be changed with the “ASD Config” configuration software.
If two RIM 36 devices are used, the relays of the second RIM 36 are not configured with any default criteria.
The required programming must be performed using the “ASD Config” configuration software.
6.5.4 Terminal assignment of an SIM 35 Serial Interface Module
SIM terminal Signal Wiring / installation (see also Sec. 8.5.6)
1 GND
Input
1
st
conductor from wire pair 2
2 D + 1
st
conductor from wire pair 1
twisted
3 D – 2
nd
conductor from wire pair 1
4
GND
O
ut
put
1
st
conductor from wire pair 2
5
D + 1
st
conductor from wire pair 1
twisted
6 D – 2
nd
conductor from wire pair 1
ASD532 Operating Manual