Incite Fire ASD 532, Operating Manual

Page: 86 / 121

Commissioning
86 / 121
7.3.5 Initial reset
When commissioning the ASD 532, an initial reset is required. When this happens, the airflow monitoring is automatically
aligned to the connected sampling pipe.
Notice
•
In principle the initial reset should be carried out under “normal system conditions”, i.e. with any ventilation
systems, air conditioning systems, etc., running in “normal operation”.
•
If a maintenance sampling hole is provided, it must be closed with adhesive tape or the maintenance clip.
•
The initial reset must be performed with normal ventilation for equipment monitoring of ventilated objects.
•
If there is an expansion, conversion, retrofitting or repair on the sampling pipe, an initial reset is imperative.
•
An initial reset must be performed after the fan speed has been changed.
•
After an FW upgrade, an initial reset is required only if expressly mentioned in the relevant firmware descrip-
tion.
•
Before performing an initial reset after switching on the ASD 532, a waiting time of at least 2 min must be
observed.
Measure Display Procedure / remarks
(1) Press key flashing C31 or other
•
Displays the default setting or the installation-
specific switch position
(2) Press the key again until the
display is on
- U ----
in succession A / b / C / E / F / I / o /
T / U
•
Displays the switch position group U
(3) Press key > - U01 - U01
•
Displays initial reset on
(4) Press the key again flashing U - - (5 to max. 120 s)
•
Initial reset in progress
(5) Wait flashing point (watchdog indicator)
•
Initial reset completed
7.3.6 Displaying the firmware version
On the ASD 532 the switch position F can be used to display the version of the firmware currently loaded.
Measure Display Procedure / remarks
(1) Press key flashing C31 or other
•
Displays the default setting or the installation-
specific switch position
(2) Press the key again until the
display is on
- F ----
in succession A / b / C / E / F
•
Displays the switch position group F
(3) Press key flashing after approx. 2 s,
e.g.
V01. Pause 00. Pause 08
•
Displays the firmware version, in this case
01.00.08
UP
UP
OK
OK
UP
UP
OK
ASD532 Operating Manual