Incite Fire ASD 532, Operating Manual

Page: 114 / 121

Faults
114 / 121
Continuation:
G30, airflow monitoring sampling pipe
Code Meaning Check: Possible causes and remedy:
001 Pipe blockage, sampling pipe Sampling pipe, air outlet on the ASD,
LS sensor
•
Check sampling pipe for pipe blockage
(sampling holes, air outlet)
•
Check and clean filter-box/filter unit
•
Check and clean LS sensor
002 Pipe breakage, sampling pipe Sampling pipe, LS sensor
•
Check sampling pipe for pipe breakage
•
Check maintenance hole
•
Sampling pipe not correctly fitted
•
Junctions open (fittings, flexible transi-
tions)
•
Check and clean LS sensor
004 Invalid LS-Ü parameters, sampling pipe sampling pipe
•
Outside of range (working point)
•
Check and clean LS sensor
•
LS sensor defective

replace
008 Airflow sensor, defective / missing Airflow sensor
Connection line
•
Not fitted, not mounted
•
Connection line defective
•
LS sensor defective

replace
G50, fan faults
Code Meaning Check: Possible causes and remedy:
001 Tacho signal missing Check fan terminals
(green wire)
•
Poor connection
•
Fan defective

replace
•
AMB defective

replace
002 Motor regulation outside range Check ASD operating voltage,
Check fan connection
•
Set operating voltage correctly
•
Fan defective

replace
•
AMB defective

replace
G60, initial reset faults
Code Meaning Check: Possible causes and remedy:
004 Initial reset time-out Motor run-in time
•
Failure to observe waiting time before
initial reset
•
Carry out new initial reset
008 Invalid parameters for initial reset Sampling pipe specifications
•
Observe sampling pipe specifications
•
Initial reset was interrupted (by “ASD
off”)

new initial reset

ASD532 Operating Manual