94
Chapter 7: Adding and removing adapter cards and drives
Installing a drive in bay 2 (continued)
3.
Drive cable connections
Connect all drive cables.
note:
If you are adding a diskette or tape drive that attaches
to the Diskette connector, make sure the signal cable
you plug into the drive is attached to the Diskette
connector on the system board. To identify the
Diskette connector, see “Identifying signal cable
connectors” on page 87.
(Back View)
Signal Cable
Audio Cable
Power Cable
Drive
4.
Left bracket replacement and drive cable
connections
For instructions on replacing the left bracket and
connecting the drive cables for any drive that may
be attached to the left bracket, see page 92.
Summary of Contents for Aptiva
