IBM Aptiva, Handbook

Page: 119 / 202

Working with the hardware in the minitower system unit 105
3.
Click on the Mwave Help option.
Moving the I/O address jumpers
If you changed the I/O address in the Windows 95
Device Manager, set the jumpers on the Mwave card to
match that address. These jumpers on the Mwave card
are labeled
P4 and P5 . To set the I/O address jumpers,
follow these instructions:
1.
Locate the I/O address jumpers on the Mwave card.
P4 P5
2.
Use the following table and picture to determine
how to set the jumpers.
If you choose
I/O address:
Set P4 to: Set P5 to:
CE30 Position B Position B
01B0 Position A Position B
0130 Position A Position A
Jumper
Position A
Position B
Jumper
Pin
(P4 and P5) (P4 and P5)