IBM Aptiva, Handbook

Page: 137 / 202

123
Before you panic: some simple fixes
Step 1
Are the power indicator lights on the system unit and monitor lit?
Note: The locations of the power indicator lights may be different from those shown in these pictures.
Power is reaching the system unit and monitor. Go to Step 2.
a. Press the on/off buttons on the system unit and monitor to make sure they are turned on.
b. Make sure your system unit and monitor cables are correctly and securely connected. Make
sure the system
unit and monitor power cords are plugged into electrical outlets. Your Read me first book shows how the
cables and cords should be connected.
c. Make sure the electrical outlets you are using are not controlled by a wall or dimmer switch.
d. If you are using a multiple outlet device (for example, a power surge protector or power strip), make sure it is
plugged in and turned on.
If the problem continues, check your Guide to HelpWare and All the Extras folder for information on obtaining
service.
Power Indicator Light
(Desktop)
Power Indicator Light
(Minitower)
Power Indicator Light
Yes
No
Diagnosing and recovering from problems 8